Using the Mobile Companion Utility in Windows CE
E - 24 Spectrum24 Wireless LAN Adapter Users Guide
E.4.10 Ping Property Page
Select Ping from the Mobile Companion Status menu to display the Ping
property page.
Use the Ping property page to send and receive ICMP ping packets across
the network to the specified IP address.
Select a target device IP address from the IP pull-down menu. Select the size
of the packet transmission from the Size pull-down menu. Select Start Test to
begin the ping test. Select Stop Test to terminate the ping test. The average
data rate in mega-bits per second, signal strength, data rate currently in use,
test statistics and round trip times are displayed for each test. The associated
access point MAC address is also displayed. The signal strength level and the
data transmission rate are displayed in real-time bar graphs.
To Next Page
Loading...
