Using the Mobile Companion Utility
Spectrum24 Wireless LAN Adapter Users Guide A - 21
A.4.10 Ping Property Page
Select Ping from the Mobile Companion Status menu to display the Ping
property page.
Use the Ping property page to send and receive ICMP ping packets across
the network to the specified IP address.
Select or enter a target device IP address from the IP pull-down menu.
Select the size of the packet transmission from the Size pull-down menu.
Select Start Test to begin the ping test. Select Stop Test to terminate the
ping test. The average mega-bits per second, signal strength, data rate
currently in use, test statistics and round trip times are displayed for each test.
The associated access point MAC address is also displayed. The signal
strength level and the data transmission rate are displayed in real-time
bar graphs.
To Next Page
Loading...
