Spectrum24 Wireless LAN Adapter Users Guide 9
Chapter 3 Hardware Installation
3.1 Preparation
Before beginning the installation, verify the hardware package contains the
Spectrum24 PC Card or PCI adapter. Keep the serial number in a safe place.
The Symbol Support Center uses this information to reference warranty and
service contract information.
Verify the model indicated on the card before use. Contact the Symbol
Support Center if an item is missing or not functioning. Refer to Appendix D
for Customer Support contact information.
3.2 Installing the Spectrum24 LA-4121 PC Card
Do not insert the PC Card into the system until instructed to do so following
the driver installation instructions specific to the operating system used.
The Spectrum24 PC Card installation requires:
• a computer with a Type II PC Card slot
• a CDROM drive or internet access
• an available interrupt (IRQ)
• an available I/O port address
• Spectrum24 High Rate 11Mbps Wireless LAN Software CDROM or the
software package downloaded from the Symbol Website.
Installation and removal methods vary for different host devices. Refer to
system documentation for information.
To Next Page
Loading...