Installing and Configuring the Driver in Windows 98SE
16 Spectrum24 Wireless LAN Adapter Users Guide
4.1 Installing the Spectrum24 Driver in Windows 98SE
If there is a version of the Spectrum24 Plus Pack utility suite in the computer,
remove it using the remove programs option within the Windows Control
Panel. Verify there is no existing Spectrum24 Windows driver in the system.
If there is an existing Spectrum24 driver, refer to 4.2 Removing a Spectrum24
Driver in Windows 98SE on page 18.
To install the Spectrum24 driver in Windows 98SE:
If a CDROM is used in the installation, do not insert the Spectrum24 adapter
in the computer before inserting the CD in the CDROM drive. If the driver
files have been downloaded from the Web, go to the Mobile Companion
folder and launch setup.exe before inserting the adapter in the computer.
Verify the adapter is NOT installed in the computer before beginning the
driver installation.
1. Ensure the previously installed driver has been removed (if necessary).
Verify the PC Card has not been inserted into the PC Card slot.
2. If a CDROM is to be used for the driver and Mobile Companion
installation, insert the CD and extract the driver files to the system. If
downloading the driver and Mobile Companion from the Symbol Web
site (http://www.symbol.com/services/downloads)
, extract the files to the
computer.
3. Go to the Mobile Companion folder and launch setup.exe.
A Symbol Mobile Companion Installer - Welcome window
displays reminding the user not to insert the WLAN card in the system
until prompted.
4. Click OK to continue.
The Symbol Mobile Companion Installer window displays prompting
the user to specify the type of installation desired.
5. Select the Install Mobile Companion on this computer checkbox.
6. Click OK to continue.
To Next Page
Loading...
