Installing and Configuring the Driver in Windows 98SE
Spectrum24 Wireless LAN Adapter Users Guide 17
The Software License Agreement window displays.
7. Click Ye s to accept the terms of the Software License Agreement.
The Symbol Mobile Companion Installer window displays prompting
the user to enable 802.11d International Roaming support if using
Symbol WLAN infrastructure components supporting the International
Roaming feature.
8. Check the 802.11d International Roaming Support checkbox if
applicable. Click OK to continue.
The Symbol Mobile Companion Installer - Information window
displays verifying the installation of Mobile Companion and the driver
files on the Windows 98SE/ME computer.
9. Click OK to continue.
10. Insert the Spectrum24 adapter when prompted by the Symbol Mobile
Companion Installer - Information window.
Follow the instructions in Chapter 3 Hardware Installation on page 9 to
install the adapter.
The Mobile Companion Available WLAN Networks property page
displays.
11. Select an existing Spectrum24 network with good signal strength
(3 out of 5 bars) or better and click the Connect icon.
The adapter associates to that network and the signal strength icon
displays in the task tray.
If there is not an existing network displayed in the Available WLAN
Networks property page, a network needs to be created before the adapter
can associate to it. Refer to 4.3 Configuring the Spectrum24 Adapter in
Windows 98SE on page 19.
12. Proceed to 4.3 Configuring the Spectrum24 Adapter in Windows 98SE on
page 19 if additional configuration is required for the adapter or if no
networks display in the Available WLAN Networks property page when
it initially displays.
To Next Page
Loading...
