Installing and Configuring the Driver in Windows CE
44 Spectrum24 Wireless LAN Adapter Users Guide
8.1 Installing the Spectrum24 Windows CE Driver
To install the Spectrum24 Windows CE driver in a PPC 2002 device:
If an existing Spectrum24 Windows CE driver exists on the computer, remove
it before installing a newer version.
Refer to the documentation shipped with the Microsoft ActiveSync program to
ensure the desktop computer used in the driver installation meets the system
requirements for the ActiveSync program.
1. Connect the sync cable to a serial or USB port between the desktop
computer and the handheld computer.
Once a connection exists between the desktop and handheld computers,
file transfers and data synchronization can take place.
Do not insert the adapter in the handheld computer before inserting the CD
into the CDROM drive. Remove the adapter from the system before inserting
the CD.
2. Insert the Spectrum24 High Rate 11Mbps Wireless LAN Software
CDROM into the CDROM drive of the desktop computer or download
the image. Go to:
(http://www.symbol.com/services/downloads).
If a CD was inserted or the setup.exe was executed an Autorun window
displays prompting the user to NOT insert the WLAN card in the system
until prompted.
3. Click OK to continue.
A Symbol Technologies Inc. Mobile Companion Installer window
displays prompting the user to specify the type of installation required.
To Next Page
Loading...
