Installing and Configuring the Driver in Windows 98SE
18 Spectrum24 Wireless LAN Adapter Users Guide
4.2 Removing a Spectrum24 Driver in Windows 98SE
To remove an existing Spectrum24 driver in Windows 98SE:
1. Click Start, select Settings and Control Panel.
2. Click on the Network icon.
The Network dialog box displays.
3. Highlight the Symbol PC Card or PCI Adapter.
4. Select Remove.
5. Click OK to remove the driver files from the Windows 98SE
hardware profile.
6. Click Close to close the Network dialog box.
7. Click Ye s to restart the system when prompted by Windows 98SE.
8. Proceed to 4.1 Installing the Spectrum24 Driver in Windows 98SE on
page 16 to install the latest version of the driver.
To Next Page
Loading...
