Hardware Installation
12 Spectrum24 Wireless LAN Adapter Users Guide
If there is a version of the Spectrum24 Plus Pack utility suite in the computer,
remove it using the remove programs option within the Windows Control
Panel. Verify there is no existing Spectrum24 Windows driver in the system. If
there is an existing Spectrum24 driver, remove the driver. Reboot the system.
If using a CDROM to install the PCI adapter driver and Mobile Companion,
do not insert the CD in the system until instructed to do so.
To install the PCI adapter, driver and Mobile Companion utility:
Power off the computer before installing the adapter.
1. Remove the computer cover.
2. Locate an available PCI slot in the computer.
3. Remove the retaining screw and bracket for the slot.
4. Align the adapter with the slot and insert firmly.
Verify the adapter seats in the slot evenly.
5. Verify the antenna connectors on the back of the PC are exposed.
6. Secure the adapter to the chassis with a retaining screw.
7. Replace the computer cover.
8. Power on the desktop computer.
A Windows hardware installation window displays. The appearance of
the hardware installation window differs amongst the supported
Windows 98SE, ME, 2000 and XP operating systems.
9. Click Next. Select the option best suited to the hardware and operating
system
The Windows hardware installation wizard prompts the user to specify a
driver installation method and path.
To Next Page
Loading...
