Installing and Configuring the Driver in Windows 2000
Spectrum24 Wireless LAN Adapter Users Guide 29
7. Click Ye s to accept the terms of the Software License Agreement.
The Symbol Mobile Companion Installer window displays prompting
the user to enable 802.11d International Roaming support if using
Symbol WLAN infrastructure components supporting the International
Roaming feature.
8. Check the 802.11d International Roaming Support checkbox if
applicable. Click OK to continue.
The Mobile Companion Installer - Information window displays
verifying the installation of Mobile Companion and the driver files on the
Win2K computer.
9. Click OK to continue.
10. Insert the Spectrum24 adapter when prompted by the Symbol Mobile
Companion Installer - Information window.
Follow the instructions in Chapter 3 Hardware Installation on page 9 to
install the adapter.
The Microsoft Digital Signature Not Found dialog box could appear at this
point in the installation. A Microsoft digital signature is not required for the
driver installation. Click Ye s to continue.
The Mobile Companion Available WLAN Networks property
page displays.
11. Select an existing Spectrum24 network with good signal strength (at least
3 out of 5 bars) or better and click the Connect icon.
The adapter associates to that network and the signal strength icon
displays in the task tray.
If there is not an existing network displayed in the Available WLAN
Networks property page, a network needs to be created before the adapter
can associate to it. Refer to 6.2 Configuring the Spectrum24 Adapter in
Windows 2000 on page 31.
To Next Page
Loading...
