Using the Mobile Companion Utility in Windows CE
E - 2 Spectrum24 Wireless LAN Adapter Users Guide
Select Status from the main menu to display the Signal, Info, IP Status, Ping
and APs (or Peers if in Ad Hoc mode) property pages. Use these pages to
view adapter software, hardware revision data and current profile
information. These pages can also be used to initiate ping tests to test data
transmission capability, assess signal strength from the adapter (using its
current profile) to the associated AP and display APs (or peers) with the same
ESSID as the current adapter profile.
Select Find WLANs from the main menu to display the Spectrum24 networks
(access points and networked peers) available for association. The networks
are listed by ESSID. To the right of each network is a signal strength icon
similar to the Mobile Companion icon. Networks with a signal strength of
Good (3 Green bars out of 5) or better should be considered for connection.
Tap a network and tap Connect Profile to connect with that network.
Select Options from the main menu to display the Options property page.
Use the Options page to configure battery consumption avoidance
capabilities, system sounds, access point and adapter association
capabilities and profile roaming options. The Options property page can
also be used to password protect the Mobile Companion utility.
The appearance of the Mobile Companion utility can differ depending on the
device being used.
To Next Page
Loading...
