Using the Mobile Companion Utility in Windows CE
Spectrum24 Wireless LAN Adapter Users Guide E - 5
When the WLAN Profiles property page initially displays, existing profiles
appear. Tap on a profile and tap the Connect Profile icon to set that profile
as the "active" (or current) profile for the adapter. The active profile displays
the transmit and receive icon to the left. Select a profile and tap the Edit icon
to display the Mode property page where the ESSID and operating mode can
be changed for the profile. Use the Encryption, IP Config and Power pages
as necessary to edit the profile power consumption and security parameters.
Tap t h e Create New Profile icon to display the Mode property page where
the ESSID and operating mode can be set for the new profile. Use the
Encryption, IP Config and Power pages as necessary to set the profile power
consumption and security parameters.
Tap t h e Delete Profile icon to remove the selected profile from the list of
available profiles from within the WLAN Profiles field.
Use the Move Up in list and Move Down in list arrow icons on the side of
the page to order the profiles. If the current profile association is lost, Mobile
Companion attempts to associate with the first profile displayed and then the
next until a new association is achieved.
To Next Page
Loading...
