5120A/5115A Operations and Maintenance Manual 27
which is handled by a proprietary Windows driver on a PC, but which is not available on a test set.
In general, you can tell if a USB printer will work on a test set if when plugged into a Windows
machine and configured as a PCL5 or PostScript printer, no proprietary software is required for it
to function. If you must install proprietary software on a PC for the printer to function, it will
usually not work when plugged directly into a test set via USB.Configure the test set to print to the
Local destination in the format the printer supports.
2. Print the data sets of interest using the methods described in sections “6.2 Printing” on
page 54 and “7.2.4 Printing from the Command Port” on page 60.
To Next Page
Loading...
Need help?
General