66 7: Collecting and Viewing Data Remotely
set dateformat <1|2|3> - sets date format for printouts.
1 = verbose (three letter month name)
2 = numeric date, month first (mm/dd/yyyy)
3 = numeric date, day first (dd/mm/yyyy)
set timeformat <24/12> - sets time format for printouts.
24 = 24 hour format
12 = 12 hour format with AM/PM specifier
show <option>
date - returns the current date in the configured format.
dateformat - current date and time format.
timeformat - current date and time format.
7.2.13 Command Summary
Table 4: Command Summary
Command Synopsis
beep Beeps the pc speaker.
button Simulates a front panel button press.
calibrate Calibrates 5120A-01 internal reference oscillators.
calinfo Returns current 5120A-01 internal reference calibration data.
control Takes or yields remote control of the test set.
help Display help for a command, or list all commands.
history Lists previously entered commands.
measurelinear Measures linear trend in ‘show phasediff’ data set.
pause Pauses updates on phase or frequency difference cache.
print Prints a plot or table.
prompt Turns command prompt on or off.
quit Closes the command connection.
removelinear Enables/Disables phase difference linear trend removal.
reset Resets the test set.
restorefactorydefaults Restores all configuration settings to factor default settings.
resume Resumes updates to phase or frequency difference cache.
set date <YYYYMMDDhhmmss> Sets system date and time.
set dateformat <1|2|3> Selects format for printout date stamps.
set phaserate <rate> Sets data port output rate in samples per second: 1, 10, 100 or
1000.
set print file Print new jobs to the file system (fetch print jobs using FTP).
set print format <format> Print new jobs in the specified format.
To Next Page
Loading...
Need help?
General