56 6: Collecting and Viewing Data Locally
6.3 Taking or Yielding Local Control.
Please see “3.2.3 User in Control” on page 14 for an introduction about the user in control of the
test set.
To ta ke Local control of the test set:
1. Perform an operation that requires control. Start or Stop data collection for example.
The reminder dialog stating that local control of the test set is required offers the
opportunity to take local control.
2. Press Ye s to take local control.
Now that the test set is under Local control, any function that requires control can be
executed using the softkey interface, mouse or keyboard.
To yi eld Local control of the test set:
1. Access the Settings page (see “4.1 The Settings Screen” on page 21 for details).
2. Press Network.
3. Press the down arrow softkey until a push button on the row labeled Operations has focus
(denoted by a white rectangle).
The softkey interface displays a PUSH softkey.
4. Press the right arrow softkey until the Yield Control button is focused.
5. Press PUSH to push the Yield Control button.
6. Press Return to return to the previous screens.
Yielding control is not strictly necessary. A Remote user can take control.
To Next Page
Loading...
Need help?
General