Symmetricom X72 User Manual

Using the Symmetricom Serial Interface Protocol
60 X72 Desiger’s Reference and User’s Guide 097-10603-01 Rev. A – November 2004
The following print out shows the response to the command for “w” for X72 “Health
Data” (wellness):
r>w
AData:
SCont: 6012
SerNum: 18C
PwrHrs: 18A
PwrTicks: 11A6848
LHHrs: 17E
LHTicks: 83DBD0
RHHrs: 17E
RHTicks: 83D2E3
dMP17: 41883621
dMP5: 40A158E9
dHtrVolt: 41381AF5
PLmp: 3FAA43C6
PRes: 3FA10F45
dLVthermC: 39500000
dRVthermC: B9DD8000
dLVolt: 3F327288
dMVoutC: 494005E0
dTempLo: 00000000
dTempHi: 42928000
dVoltLo: 4134DC6A
dVoltHi: 41C1CA16
iFpgaCtl: 029E
dCurTemp: 42690000
dLVoutC: 3E25B538
dRVoutC: 3E19A67E
dmv2 demAvg: 3F337D72
The following print out shows how entering the letter “a” followed by an integer sets
the “enable/ disable” feature of FC mode. Integer zero followed by <cr> disables FC
mode and any nonzero integer followed by <cr> enables the FC mode.
r>a
<nonzero integer-><cr>
FC mode enabled
r>a
o<cr>
FC mode disabled
The following print out shows the “control register” contents by entering the letter
“p”:
r>p
Control Reg: 029E

Symmetricom X72 Specifications

General

Brand	Symmetricom
Model	X72
Category	Test Equipment
Language	English