Synrad Firestar TI Series User Manual

index
i4
Synrad Firestar ti-Series operator’s manual
multiple PLC driven inputs, 3-20
PLC driven interlock signal, 3-20
PWM Input, 1-14, 2-8, 3-6, 3-8, 3-11, 3-14,
3-16
PWM Return, 1-14, 2-8, 3-6, 3-8, 3-10,
3-14
Remote Interlock, 1-15, 2-6, 2-9, 3-3, 3-10,
3-11, 3-14, 3-15, 3-16, 3-19, 3-25, 4-11,
4-12, 4-14
Remote Reset/Start Request, 2-7, 2-9, 3-3,
3-10, 3-11, 3-14, 3-15, 3-16, 3-26, 4-11,
4-12
Shutter Open Request, 1-15, 2-3, 2-6, 2-8,
2-9, 3-3, 3-11, 3-15, 3-16, 3-17, 3-27,
4-9, 4-11, 4-13, 4-15
Inspections
daily, 4-2—4-3
incoming, 1-3
Integrating safety features 3-26—3-27
keyswitch functions, 3-26—3-27
remote interlock functions, 3-27
shutter functions, 3-27
Interlock. See Remote Interlock
Interlock Open output 3-11, 3-17, 3-27, 4-9,
4-10, 4-14, 4-15
signal description, 3-11, 3-17
INT indicator. See Remote Interlock (INT) indi-
cator
Introduction 1-2
Inventory 1-4—1-5
contents description, 1-5
ship kit contents, 1-4
K
Keyswitch 6, 8, 9, 1-2, 2-3, 2-6, 2-7, 2-8, 2-9,
3-10, 3-14, 3-15, 3-26, 3-27, 4-9, 4-11,
4-12
Keyswitch faults
resetting, 4-11—4-12
Keyswitch functions
integrating, 3-26—3-27
L
Label locations 4, 5
Lase (LASE) indicator 6, 9, 2-3, 2-7, 2-9, 3-10,
3-17, 4-9, 4-10, 4-14, 4-15
Laser Active output 4-9, 4-10, 4-14, 4-15
signal description, 3-10, 3-17
Laser aperture 2-2, 2-6, 2-8, 4-16
Laser faults 4-11, 4-13—4-16
Laser Institute of America 3
Laser Ready output 3-26, 4-9, 4-10, 4-14,
4-15
signal description, 3-11, 3-17
Laser Safety Handbook 3
Laser safety information 1—10
Laser tube 3-2—3-3
Lens cleaning 4-3—4-5
M
Maintenance 4-2—4-5
cleaning optical components, 4-3—4-5
daily inspections, 4-2—4-3
disabling Firestar, 4-2
storage/shipping, 4-3
Marking/engraving operation 3-9
Material Safety Data Sheets (MSDS) 2, 4-4
Model numbers 1-2
Modulation 3-5—3-6
Mounting 1-6—1-7
from above, 1-6—1-7
from below, 1-7
Mounting bolts 1-4, 1-5, 1-7
Multiple PLC driven inputs 3-20
O
Occupational Safety and Health Administration
(OSHA) Online Technical Manual, 3
OEM faults
resetting, 4-12—4-13
Operating modes 3-7—3-9
analog current control, 3-7—3-8
analog voltage control, 3-7—3-8
continuous wave, 3-8
external control, 3-7
gated operation, 3-8—3-9
marking/engraving operation, 3-9
Operational flowchart 4-7
Operator’s manual 1-4, 1-5
Optical accessories mounting 2-2
Optical components
cleaning, 4-3—4-5
cleaning materials, 4-4

Synrad Firestar TI Series Specifications

General

Brand	Synrad
Model	Firestar TI Series
Category	Medical Equipment
Language	English