4. Connect a Sample Tube with Decontamination Solution (violet solution, Order No.
04-4010_R), press “Continue” and wait until the system finished.
5. Remove the Sample Tube, press “Continue” and wait until the system has
finished.
6. Connect the Sample Tube again, press “Continue” and wait until the system has
finished
7. At the end press “Continue”. The instrument will be cleaned and the priming
process ends.
5.2 Work process
Figure 5: “WORK” is red highlighted
• Choose the “WORK” button to measure and acquire data.
To Next Page
Loading...
