CyFlow
™
Robby 6 Autoloading Station | Operating Manual | September 2020 | Revision 002
2.3.1 Symbols in this document
To make warnings more accessible, the following symbols are used to reference the kind
of hazard
Electrical hazards
Beware of electrical currents and electrical shocks.
2.3.2 Safety information
Safety information and warnings are marked by symbols and signal words. Hazards are
categorized into four levels. All warnings are structured according to the same model. The
type of hazard is stated after the signal word. Then the consequences that may result
from the hazardous situation are described. And finally, how the hazardous situation can
be avoided. If applicable a hazard symbol is portrayed, to indicate the kind of hazard.
Names the source of the hazard
Describes the consequences of the hazard. This will result in death or
severe personal injury.
• Specifies the steps that must be taken to eliminate the hazard.
Names the source of the hazard
Describes the consequences of the hazard. This could result in death or
severe personal injury.
• Specifies the steps that must be taken to eliminate the hazard.
These symbols are in black and white throughout this document, even though they appear in colour on the device. Their
meaning is unchanged.
To Next Page
Loading...
