2 Presentation
The CyFlow
™
Ploidy Analyser can be operated with or without the CyFlow
™
Robby 6
Autoloading Station.
This manual is only valid for CyFlow
™
Robby 6 Autoloading Station in combination with
CyFlow
™
Ploidy Analyser with CyView™ software.
Installation and connection of the CyFlow
™
Robby 6 Autoloading Station is part of the
authorised service personnel responsibilities, please contact your local Sysmex
representative.
For general information about the CyFlow
™
Ploidy Analyser and its components please
refer to its respective labelling.
Read all supplied labelling thoroughly before using the device. Please keep this operating
manual for future reference.
There are product data sheets for the reagent kits and application notes available. Please
also refer to these documents.
If you have any questions about the content of this operating manual or the use of the
device, contact your local Sysmex representative.
2.1 What other manuals are available?
• CyFlow
™
Ploidy Analyser Operating Manual (Doc. No.: CY-S-3039IFUEN)
2.2 What standards were applied for CE compliance?
The system described in this manual is marked with a CE-mark, which
confirms the compliance with the essential requirements of the following
European Directives:
• 2014/35/EC on electrical equipment designed for use within certain
voltage limits
• 2014/30/EC on electromagnetic compatibility
• 2011/65/EC on the restriction of the use of certain hazardous
substances in electrical and electronic equipment
2.3 What typographical conventions are used in this manual?
Read the Operating Manual as well as the associated labelling thoroughly before using
the device. Please keep the Operating Manual for future reference.
The Operating Manual will help operating the device. Emphasis lays on start-up and safe
operation of the device.
If you have any questions about the content of the Operating Manual or operating the
device, please contact your local Sysmex representative.
To Next Page
Loading...
