SYSMEX SP-10 - Reagent on Board the SP-Series

Document Ref: SUKBMS-24-
601
Version: 2.0
Page | 9
Date: 19/07/2021
Classification
Unrestricted
Reagent on board the SP-series
The number of on-board reagents on the SP-10 depends on the staining protocol used. The table
below summarizes the reagents recommended for use on the SP-series.
Reagent Name
Function
On board
Stability
(Days)
Cell Pack
Rinse solution used for rinsing the
whole blood aspiration line
60
May-Grunwald
stain
Used for staining blood smears
90
Wrights stain
Used for staining blood smears
90
Giemsa stain
Used for staining blood smears
90
Phosphate buffer
Used in the preparation of blood
smears
90
Methanol
Used in staining process depending on
protocol and during maintenance
procedures
N/A