Inside the Stain Table
1. Methanol pipette – Slide is lifted from cassette and methanol is dispensed into the single
cassette following which the slide is returned to the cassette.
2. Stain pipette 1 - Slide is lifted from cassette and stain 1 is dispensed into the single
cassette following which the slide is returned to the cassette. Dependent on staining
protocol the slide is then lifted again and dried by the fan.
3. Stain pipette 2 – Removes stain 1 from the cassette and dispenses the diluent or rinse
solution for stain 1.
4. Stain pipette 3 – dispenses diluent for stain 2 into cassette after the staining solution and
rinse solution have been drained.
5. Rinse pipette – Rinses smears after staining.
To Next Page
Loading...
