Appendix C
TA I
NSTRUMENTS
TGA 2950C–14
Automatic Tare
Because the TGA 2950 has two weight ranges,
taring is done for both ranges. The tare weight
is stored by the instrument for the appropriate
weight range.
1. Place the platform on the sample arm as
shown in Figure C.3. Make sure that the
small pin is inserted in the hole in the
platform. This will seat the platform
correctly.
2. Using brass tweezers, place each sample pan
in a numbered place on the platform, making
sure it is stable.
Figure C.3
Loading the Auto
TGA Sample Platform
To Next Page
Loading...
