TA Instruments TGA 2950 - Manual Operation; Tracking the TGA Autosampler Status

TA I NSTRUMENTS TGA 2950 C–19
TGA 2950 Autosampler Option
Manual Operation
Use the AUTO SELECT and/or SCROLL/
AUTO SELECT to manually select the pan that
you want to run, then follow the procedures
found on in Chapter 3 to start, stop, and monitor
an experiment.
For details setting up the methods consult the
online help and documentation.
Tracking the TGA
Autosampler Status
To monitor the current run, observe the status of
the Auto TGA , etc. you will need to access the
TA Instruments Instrument Control software.
Refer to the online help and documentation for
further information.