TA I
NSTRUMENTS
TGA 2950 4–13
Cabinet
The TGA cabinet (Figure 4.6) consists of the
cabinet housing, the instrument display and
keypad, the electronics compartment, the purge
and cooling gas fittings, and the rear panel.
Figure 4.6
TGA Cabinet Components
The TGA cabinet housing consists of a base
casting, a rear cover, and a sample preparation
tray. The base casting is one-piece casting of
heavy-weight aluminum, designed to provide a
stable platform for the TGA instrument parts.
The rear cover is injection molded using a
heavy-gauge thermoplastic material, designed
for easy cleaning. The removable sample
preparation tray is located on the right side of
the instrument. The tray is designed to keep
liquids from spilling into the instrument.
Description of the TGA 2950
Electronics
Compartment
Cooling Gas
Fitting
Rear Panel
Instrument Display
and Keypad
To Next Page
Loading...
