Technical Reference
TA I
NSTRUMENTS
TGA 29504–14
The instrument display and keypad are
described in Chapter 1.
The electronics compartment contains the
electronics that control the instrument functions.
Two purge fittings are located on the left side
of the instrument back, one for the balance
chamber and one for the furnace housing.
The cooling gas fitting is located on the right
side of the instrument back and is for furnace
cool-down air.
The rear panel (Figure 4.7) has the signal and
power connections for the instrument, the fuses,
the ready light, the address switches, and the
Reset button.
Figure 4.7
Rear Panel
To Next Page
Loading...
