TA Instruments TGA 2950 - EGA Furnace Specifications

TGA 2950 EGA Furnace Option
TA I NSTRUMENTS TGA 2950 D–5
The furnace base moves the furnace assembly
up around the sample pan to the closed position,
or down away from the sample pan to the open
position.
EGA Furnace
Specifications
Refer to Table D.1 below for the specifications
of the EGA furnace. Some of these may be
similar to the standard furnace for the TGA
2950.
Table D.1
EGA Furnace
Specifications
Temperature range 25°C to 1000°C
Thermocouple Platinel II*
Heating rate 0.1 to 50°C/min
*Platinel II is a registered trademark of
Engelhard Industries.