Appendix C
TA I
NSTRUMENTS
TGA 2950C–20
Interrupting a Run
If you want to stop an Auto TGA run that is in
progress, you can use one of the following keys
on the TGA instrument keypad:
Stop Terminates the current
method and run and
causes the Auto TGA to
unload the pan and start
the next run. However,
the data file for the
interrupted run is saved.
Reject Terminates the current
method and AS run and
causes the Auto TGA to
unload the cell and start
the next run. The data file
for the interrupted run is
discarded.
Other options are available through the
controller functions, see the online help and
documentation for further information.
To Next Page
Loading...
