M8SL2-00-002-812 General Information D1.5
© Copyright Tait Electronics Limited August 2004. All rights reserved.
1.1.5 Front Panel Operating Controls
Figure 1.1 Front Panel Layout
1.1.5.1 Mode LED
The colour of the Mode LED on the front panel indicates the T803 mode of operation:
• Green = Base station mode
• Red = Repeater (talk through) mode
or clear alarms
Green = base station mode
Red = repeater mode
Speaker
Speaker on/off Change mode
Adjust speaker volume
Plug in programming
cable from PC with
PGM800Win
Plug in test microphone
to talk to despatcher or
radios
Green = auxiliary alarm
Red = rack alarm
Flashing see below
Flashing see below
Press together to enter test modes
To Next Page
Loading...
