M8SL2-00-002-812 T800 Ancillary Equipment H1.3
© Copyright Tait Electronics Limited August 2004. All rights reserved.
T800-04-0000 RSSI
The T800-04 RSSI option PCB plugs directly into the main PCB (support circuitry being
fitted as standard). It is fitted to the T855, T875 and T885 whenever receiver signal
strength monitoring is required, e.g. trunking or voting. Its function is to provide a DC
voltage proportional to the signal level at the receiver input.
T800-10-0000 Channel Select PCB
The T800-10-0000 is a small PCB that plugs into the Micromatch connector (SK805) in
the microcontroller compartment of a T800 SL2 receiver, exciter or transmitter. It is fitted
with an eight-switch DIP switch which allows the manual selection of any one of the
channels already programmed into the module by PGM800Win. The T800-10-0000 is
also fitted with a Micromatch socket to provide access to SK805 for programming pur-
poses.
T800-80-0000 Local Microphone
A 600Ω microphone complete with 300mm cord terminated in a ¼” stereo plug for use
with the T854.
T800-80-0001 T803 Microphone
A 600Ω microphone complete with 300mm cord terminated with a RJ11connector for
use with the T803.