EasyManua.ls Logo

Tait TP8135 - Page 102

Tait TP8135
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
102
The red LED lights up, and stays lit while the battery charges.
For a battery that is almost completely discharged, allow two
hours.
When charging is complete, the green LED
stays lit.
LED behavior
If there is a battery in the charger when power is supplied to the
charger, the LEDs behave as follows:
If the charger does not behave as expected:
Make sure the radio or battery is seated properly in the
charger.
Check that the charger is properly plugged in.
Check that the battery and charger contacts are clean. To
clean, wipe the contacts with a dry lint-free cloth to remove
any dirt, oil or grease.
LED Meaning
briefly
The charger has been connected to a power supply.
steady
The battery is charging.
steady
Charging complete. Remove the battery, or leave it in
the charger.
steady
The battery temperature is outside the normal charg-
ing range. Charging will start or resume once the
temperature is within normal limits. No action is
required by you.
There is a fault. Contact your local regional Tait office.

Table of Contents

Related product manuals