62
Ending a group call
A group call is automatically cleared down when the caller
is finished.
If you want to end the group call:
■ press ,
■ press then , or
■ change to another position on the channel selector.
Changing group membership
There are two methods of changing your membership of groups
or scan groups. You may be able to either:
■ use the channel selector, or
■ use the main menu.
Using the channel selector
To select a group or scan group:
■ Switch to the position on the channel selector designated for
the group you wish to call. Press the PTT key or .
Using the main menu
Your radio may be programmed with permanent or user-selectable
groups and scan groups. If any group or scan group is user-
selectable, you can choose to unsubscribe from that group or
subscribe to it.
Selecting a new scan group means that the previously selected
scan group is automatically deselected.
To select a group or scan group:
1 Long press
to enter menu mode.
2 Select
GROUP SELECT>SELECT GROUP.
MENU
SELECT
GROUP
To Next Page
Loading...
Need help?
General
