52
Unconnected calls
If your call is not connected, your radio responds with one of the
following messages:
■ If the display reads ENGAGED, the radio you are calling is
already busy. Try your call again later.
■ If the display reads QUEUED, the radio you are calling has
queued your call. Wait for the radio to call you back, or try your
call again later.
■ If the display reads SYS BUSY, the system is too busy to handle
your call. Try your call again later.
■ If the display reads NOT HOME, the radio you are calling has
their radio switched off, in ‘do not disturb’ mode or is out of
range. Try your call again later.
■ If the display reads WAIT QUE, the system is not able to connect
your call straight away but queues it and connects it as soon as
possible.
■ If the display reads UNAVAIL, your radio is not permitted to
make the type of call you requested.
■ If the display reads UNOBTAIN, the number you called is not
supported.
To Next Page
Loading...
