To Next PageTo Next PageHow to decrease time to get hot water from Takagi T-H3-DV Water Heater?
If it takes a long time to get hot water at the fixtures with your Takagi water heater, remember that the delivery time depends on the piping length between the heater and fixtures. The longer the distance, the longer it takes. If you want hot water faster, consider a hot water recirculation system.
What to do if hot water is not available with Takagi T-H3-DV?
If hot water is not available when a fixture is opened, verify the unit has a 120 VAC, 60 Hz power supply. If you're using a remote or temperature controller, ensure it's powered on. Check that the gas and water supply valves are fully open. Also, see if the filter on the cold water inlet is clean. Ensure the hot water fixture is open enough to draw at least 0.5 GPM through the water heater. Check if the unit is frozen and confirm there is enough gas in the tank/cylinder for propane models.
General| Category | Residential |
|---|---|
| Gas Type | Natural Gas or Propane |
| GPM @ 45°F Rise | 9.8 GPM |
| GPM @ 70°F Rise | 6.3 GPM |
| Energy Factor | 0.82 |
| Voltage | 120V |
| Type | Tankless |
| Fuel Type | Gas |
| Maximum BTU Input | 199, 000 BTU |
| Venting | Direct Vent |
| Venting Type | Direct Vent |
| Warranty | 5 years parts |
