Takeuchi TB014 User Manual

111
MAINTENANCE
Daily Inspection (Every 10 Hours)
Lubricating the Working Equipment
1.Set the machine to the lubrication posture shown in the diagram above, ground the
working equipment, then stop the engine.
2.Use the grease gun to lubricate the grease nipples.
3.Wipe off the expelled grease.
Supplement: The dozer blade uses greaseless bushes, so there is no need to lubricate it.
C4G0132

Takeuchi TB014 Specifications

General

Engine	Yanmar 3TNV70
Overall Width	980 mm
Transport Width	980 mm
Bucket Capacity	0.04 m3
Max Digging Depth	2260 mm