Takeuchi TB014 User Manual

94
TRANSPORT
Cautions on Transporting
WARNING
¡¡
¡¡
¡Know and follow the safety rules,
vehicle code and traffic laws when
transporting the machine.
¡¡
¡¡
¡Consider the length, width, height and
weight of the truck with the machine
loaded on it when determining the best
route.
Securing the Machine
After loading the machine in the designated
position, secure it as described below.
Transporting Posture
1. Lower the dozer blade.
2. Fully extend the bucket and arm cylinders,
then lower the boom.
3. Stop the engine and remove the starter
key.
4. Set the safety lock lever securely to the
locked position.
5. Set stoppers in front and behind the
crawlers.
6. Put a chain or wire rope over the lower
frame and fasten it securely to prevent
sideways slippage.
7. Secure the bucket with a chain or wire
rope.
IMPORTANT: Place a wooden block
under the bucket so that it is not damaged
by hitting the floor.
Wire rope
Padding
TRANSPORT
Cautions on Transporting
E4F002

Takeuchi TB014 Specifications

General

Engine	Yanmar 3TNV70
Overall Width	980 mm
Transport Width	980 mm
Bucket Capacity	0.04 m3
Max Digging Depth	2260 mm