Takeuchi TB014 User Manual

62
OPERATION
Before Starting Operation
Mounting and Dismounting
WARNING
¡¡
¡¡
¡Do not jump on or off the machine.
Never attempt to mount or dismount a
moving machine.
¡¡
¡¡
¡When mounting and dismounting the
cab, first open the door fully to the
locked position and check that it does
not move. (For machines with cabs)
¡¡
¡¡
¡Always face the access system and
maintain a three point contact with the
recommended handrails and steps
while getting on and off the machine.
Keep steps and platform clean.
¡¡
¡¡
¡Never use the safety lock lever or
control levers as hand holds.
Walk-Around Inspection
Perform the walk-around inspections once
a day before starting the engine the first time
that day.
Perform the inspections as described under
“Maintenance - Walk-Around Inspection”
(pages 105 and 106).
Daily Inspection
Perform the daily inspections once a day
before starting the engine the first time that
day.
Perform the inspections as described under
“Maintenance - Daily Inspection” (pages
107 to 111).
C4D001
D5D011E

Takeuchi TB014 Specifications

General

Engine	Yanmar 3TNV70
Overall Width	980 mm
Transport Width	980 mm
Bucket Capacity	0.04 m3
Max Digging Depth	2260 mm