Takeuchi TB014 User Manual

124
MAINTENANCE
Every 1000 Hours
Cleaning the Engine Cooling
System
WARNING
¡¡
¡¡
¡ Stop the engine and allow the machine
to cool down before performing
maintenance.
• The engine, muffler, radiator and
many other parts of the machine are
hot directly after the engine is
stopped. Touching these parts will
cause burns.
• The engine coolant is also hot and
under high pressure. Be careful when
loosening caps and plugs. Working
on the machine under these
conditions could result in burns or
injuries due to the hot coolant
spurting out.
¡¡
¡¡
¡ If maintenance must be performed with
the engine running, always work as a
two-person team with one person
sitting in the operator’s seat while the
other works on the machine.
• When performing maintenance, be
sure to keep your body and clothing
away from moving parts.
¡¡
¡¡
¡ Standing at the back of the machine
while the engine is running is extremely
dangerous, as the machine could move
suddenly. Never stand at the back of
the machine while the engine is
running.
¡¡
¡¡
¡ Do not remove the radiator cap or drain
plugs when the coolant is hot. Stop the
engine, let the engine and radiator cool
and loosen the radiator cap or drain
plugs slowly.
1. Open the engine hood.
< TB014 >
< TB016 >
2. Gradually loosen the radiator cap (3) to
release the internal pressure, then
remove.
< TB014 >
< TB016 >
2
1
L
H
3
2
1
L
H
3
4
4

Takeuchi TB014 Specifications

General

Engine	Yanmar 3TNV70
Overall Width	980 mm
Transport Width	980 mm
Bucket Capacity	0.04 m3
Max Digging Depth	2260 mm