27
SAFETY
Securely block the machine or
any component that may fall
¡ Before performing maintenance or repairs
under the machine, set all working
equipment against the ground or in the
lowermost position.
¡ Securely block the tracks.
¡ If you must work beneath the raised
machine or equipment, always use wood
blocks, jack-stands or other rigid and
stable supports. Never get under the
machine or working equipment if they are
not sufficiently supported. This procedure
is especially important when working on
hydraulic cylinders.
Securely block the working
equipment
To prevent unexpected movement, securely
block the working equipment when repairing
or replacing the cutting edges or bucket teeth.
Secure the engine hood or cover
when opened
Be sure to secure the engine hood or cover
when opening it. Do not open the engine
hood or cover on slopes or in strong wind.
Place heavy objects in a stable
position
When removing or installing the hoe
attachment, place it in a stable position so
that it does not tip over.
Maintenance Precautions
To Next Page
Loading...
Need help?
General
