Takeuchi TB014 User Manual

78
OPERATION
Operating Procedures
Do not Perform Operations Using the
Machine’s Dropping Force
Putting excessive strain on the machine will
shorten its service life. Use the hydraulic
force of the cylinders and always dig with
shallow, long strokes.
Digging Base Rock
For hard base rock, break the rock up into
small pieces with a breaker, etc., before
digging. This prevents damage to the
machine and is thus more economical in the
end.
Caution on Exposing the Dozer Blade to
Shocks
Hitting the dozer blade against rocks, etc.,
could damage the dozer blade or the blade
cylinder.
Caution on Folding the Hoe Attachment
Be careful not to hit the bucket or dozer blade
when folding the hoe attachment.
Do not Use the Dozer Blade as an Outrigger
E4D033
E4D034
E4D040
E4D041
N0D009

Takeuchi TB014 Specifications

General

Engine	Yanmar 3TNV70
Overall Width	980 mm
Transport Width	980 mm
Bucket Capacity	0.04 m3
Max Digging Depth	2260 mm