Takeuchi TL220 User Manual

SAFETY
General Precautions
Never remove safety equipment
• Make sure all protective guards, canopies,
doors, etc., are
in place and secure. Repair
or replace damaged components before
operating the machine.
II
T7A005
• Know how to use the safety bar, seat belt
and other safety equipment and use them
properly.
• Never remove any safety equipment
except for service. Keep
all safety
equipment
in good operating condition.
Use a signal person and flagman
E3A050
Know and use the hand signals required for
particular jobs and make sure who has the
responsibility for signaling.
• All personnel must fully understand
all the
signals.
• The operator shall respond to signals only
from the appointed signal person, but
shall obey a stop signal at any time from
anyone.
9
• The signal person must stand in a clearly
visible location when giving signals.
Be sure to raise the safety bar
before leaving the operator's seat
E3A070
• Before leaving the operator's seat:
• Lower the lift arms to the ground or
engage the lift arm stop.
• Stop the engine.
• Raise the safety bar to engage the
lock.
• Remove the key and take it with you.
• If any controls
are touched accidentally
when the safety bar is lowered, the
machine will move suddenly, and cause
serious injury or death.

Takeuchi TL220 Specifications

General

Brand	Takeuchi
Model	TL220
Category	Compact Loader
Language	English