MAINTENANCE
Every
500
Hours
Replacing the Fuel Filter
AwARNING
•
Do
not smoke or permit open flames
while handling fuel or working
on
the
fuel system.
• Stop the engine
in
a well-ventilated
place and allow it to cool before
performing maintenance.
• Clean up spilled fuel immediately.
< TL220 I TL230 I TL240>
1.
Open the engine hood.
140
<TL250>
1.
Tilt up the canopy.
2.
Place a pan under the filter
(1).
3. Using a filter wrench, turn the filter
(1)
counterclockwise and remove it.
4.
Clean the surface
of
installation of the
filter stand.
5.
Apply a thin layer
of
oil
to the packing
of
the new filter.
6. Install the new filter by hand.
7.
Tighten one more turn after the filter
packing comes
in
contact with the surface
of
installation.
8.
Bleed the
air.
Refer to page
161
, "Bleeding the Air from
the
Fuel
System."
To Next Page
Loading...
Need help?
General
