MAINTENANCE
Daily Inspection (Every 10 Hours)
Perform the following inspections once every day before starting the engine the first time.
AwARNING
• Before operating, perform the daily inspections and make repairs immediately
if
any
irregularities are found.
• Be sure
to
secure the engine hood
or
rear
door
when opening it. Do
not
open the
engine hood
or
rear
door
on slopes
or
in strong winds.
Inspecting and Replenishing the
Coolant
AwARNING
Do
not
remove the radiator cap
or
drain
plugs when the coolant is hot. Stop the
engine, let the engine and radiator cool,
and loosen the radiator cap
or
drain plugs
slowly.
Inspection
U1
G001
1 . Open the rear door.
2. Inspect the quantity
of
coolant
in
the
reserve tank
(1)
.
The level should be between the upper
limit
(H)
and lower limit
(L).
If it
is
below the lower limit
(L),
replenish.
118
Replenishing
1. Remove the reserve tank cap
(2)
.
2.
Add
coolant up
to
the upper limit
(H)
of
the
reserve tank
(1
).
If the reserve tank is empty, inspect for
fluid leakage, then inspect the radiator
(3)
coolant level. If it is low, add coolant
to
the
radiator
(3)
first, then
to
the reserve tank.
3.
Install the cap
(2).