I
I
I
I
I
MAINTENANCE
Maintenance Chart
Maintenance Items
Walk-Around Inspection
Inspecting by opening the engine hood and rear
door
Inspecting by walking around the machine
Inspecting while sitting
in
the operator's seat
Daily Inspection (Every 10 Hours)
Inspecting and replenishing the coolant
Inspecting and replenishing the engine oil
Inspecting the water separator
Inspecting the fuel level
Inspecting the hydraulic oil level and replenishing
Lubricating the working equipment
After First
50
Hours
(New
Machines Only)
Replacing the hydraulic oil return filter
Replacing the engine oil and oil filter
Inspecting and adjusting the fan belt
Replacing the pilot line filter
Every
50
Hours
Inspecting and adjusting the track tension
Inspecting the battery fluid level and replenishing
Draining the fuel tank
Inspecting the bucket stoppers (bolts
I nuts)
Every
100
Hours
Cleaning the water separator
After First 250 Hours
(New
Machines Only)
Replacing the travel motor gear oil*
Page
I
116
117
117
I
118
119
119
120
121
122
I
124
125
127
128
I
130
132
134
135
I
136
137
*·
If the percentage
of
the travel time within the total operating time
is
high, replace the gear
oil earlier than the specified time.
114
To Next Page
Loading...
Need help?
General
