CONTROLS
Doors
and
Covers
Ignition Key
E4B003
The ignition key
is
used not only
to
start and
stop the engine, but also
to
lock and unlock
the following places:
•
Fuel
filler cap
• Engine hood
• Cab door
• Manual storage
Cab
Door<
TL220 >
,A WARNING
• When mounting and dismounting the
cab, first open the door fully to the
stopped position and check that
it
does not move.
• When opening and closing the
door,
grasp the handle securely and move
the door
slowly.
Opening the door
suddenly could result
in
it
hitting your
head, or your hands or feet could get
caught.
T3B004
42
Preparation before Opening
and
Closing
the Cab Door
1.
Park the machine on a level surface and
stop the engine.
2.
Raise the safety
bar.
Lock and unlock
I
;f/!
T3B005
1.
Insert and turn the ignition
key.
Opening
T3B006
1. Turn the handle
(2)
clockwise and open
the door fully.
To
open the door from inside the cab:
1.
Turn the handle
(2)
counterclockwise and
open the door fully.
Closing
1.
Grasp the handle
(2)
or
(3)
and slowly
close the door.
To Next Page
Loading...
Need help?
General
