MAINTENANCE
Every 250
Hours
Cleaning the Radiator Fins and Oil
Cooler Fins
A, WARNING
Wear required appropriate equipment
such as safety glasses and
filter
mask
when using compressed air, because
metal fragments
or
other
objects
can
fly
and cause serious personal injury.
IMPORTANT: Be careful
not
to
damage
the
radiator
fins
and oil cooler
fins
when
cleaning them.
• When using compressed air
or
pressurized water, make sure
the
pressure is
no
higher than 200 kPa
(28
psi) and hold
the
nozzle sufficiently
away from
the
fins.
IMPORTANT: When using water, cover
the
electrical system
to
prevent
water
from getting in.
IMPORTANT: When operating
the
machine in very
dusty
places, inspection
and maintenance should
be
performed
everyday.
1 . Open the rear
door
.
2.
Blow compressed air on the radiator fins
and oil cooler fins
to
remove mud and dirt
stuck on them.
139
Replacing the Engine Oil and Oil
Filter
Refer
to
page 125, "Replacing the Engine Oil
and Oil Filter."
Inspecting and Adjusting the Fan
Belt
Refer
to
page 127, "Inspecting and Adjusting
the Fan Belt."
Cleaning the Condenser (Option)
Refer
to
page 190, "Cleaning the
Condenser."
Inspecting and Adjusting the Air
Conditioner Belt (Option)
Refer
to
page 190, "Inspecting and Adjusting
the Air Conditioner Belt."
To Next Page
Loading...
Need help?
General
