OPTIONS
TL250
High
Ambient
Cooling
Package
Maintenance
of
the
roof
mounted
cooler
AwARNING
Wear
required
appropriate
equipment
such
as safety
glasses
and
filter
mask
when
using
compressed
air,
because
metal
fragments
or
other
objects
can
fly
and
cause
serious
personal
injury.
IMPORTANT: Be careful
not
to
damage
the
radiator
fins
and
oil
cooler
fins
when
cleaning them.
•When
using
compressed
air
or
pressurized
water,
make
sure
the
pressure
is
no
higher
than
200 kPa (28
psi)
and
hold
the
nozzle
sufficiently
away
from
the
fins.
IMPORTANT:
When
using
water,
cover
the
electrical
system
to
prevent
water
from
getting
in.
IMPORTANT:
When
operating
the
machine
in
very
dusty
places,
inspection
and
maintenance
should
be
performed
every
day.
• The roof mounted hydraulic oil cooler
has a hinged cover to allow for easy
access to the cooler core for cleaning
and servicing. The engine must be
stopped and the key turned to the off
position before opening the cover to
prevent automatic activation of the
fan.
• Open cover.
• Blow compressed air
on
the
cooler fins to remove debris.
• Secure cover before operating.
203
Be careful
with
hot and
pressurized components
~
Jl})j,Jf
1~~){,)))J
E3A110
Stop the engine
and
allow the machine to
cool down before performing inspection
and
maintenance.
• The engine, muffler, radiator, hydraulic
lines, sliding parts
and
many other parts
of the machine are hot after the engine
is
stopped. Touching these parts will cause
burns.
•The
engine coolant, oil
and
hydraulic fluid
are also hot
and
under high pressure.
Be
careful when loosening caps and
plugs. Working
on
the machine under
these conditions could result
in
burns or
injuries due to the hot oil spraying
out.
To Next Page
Loading...
