It
is
your responsibility to observe
all
pertinent laws
and
regulations and to follow the
manufacturer's instructions
on
machine operation, inspection and maintenance.
Virtually
all
accidents occur as the result
of
a failure to observe basic safety rules and
precautions. An accident can often be avoided by recognizing potentially hazardous situations
beforehand. Read and understand
all
of
the safety messages, which explain
how
to
prevent
these accidents from occurring. Do not operate the machine until you are sure that you have
gained a proper understanding
of
its operation, inspection and maintenance.
•SIGNAL
WORDS
Safety messages appearing
in
this manual and on machine decals are identified by the words
"DANGER", "WARNING" and "CAUTION". These signal words mean the following:
AoANGER
The word "DANGER"
indicates
an
imminently
hazardous situation,
which,
if
not avoided,
can result
in
serious
injury
or death.
AwARNING
The word "WARNING"
indicates a potentially
hazardous situation,
which,
if
not avoided,
could result
in
serious
injury
or death.
AcAUTION
The word "CAUTION"
indicates a potentially
hazardous situation,
which,
if
not avoided,
may result
in
injury.
IMPORTANT:
The word "IMPORTANT"
is
used
to alert operators
and
maintenance
personnel about situations that can result
in
possible damage to the machine
and
its
components.
It
is
impossible
to
foresee every possible circumstance that might involve a potential hazard.
The warnings
in
this manual
or
on the machine cannot cover all possible contingencies.
You
must exercise all due care and follow normal safety procedures when operating the machine
to ensure that no damage occurs
to
the machine, its operators
or
other persons.
•EXPLANATION OF GRAPHICAL SYMBOLS
Following
is
an explanation
of
symbols used
in
this manual.
(9, X .......... prohibition
6 ;
{JJ
........ Lock
d;
r:ff
....... Unlock
To Next Page
Loading...
Need help?
General
