B
ELT CLIP
6
Attaching the Belt Clip:
A
NTENNA
1. Remove the battery. Slide the
belt clip into the smooth slot on the
back of the battery.
2
. Press downward to secure the
belt clip in place.
Detaching the Belt Clip:
1
. Remove the battery. Press on the elastic plastic
part in the middle of the belt clip towards the
direction of the walkie-talkie.
2. While holding it, pull the belt clip upward to
detach it.
A
ttaching the Antenna
1. Hold the base of the antenna and screw it clockwise into the
antenna socket on the top of the walkie-talkie until tight.
Detaching the Antenna:
2. To remove the antenna, unscrew it counterclockwise.