29
Search (SE) Mode:
The radio exits scanning and stays on the frequency when it detects a signal.
H
ow To Set These Mode:
1. Press The Menu Button.
2
. Press The ''Up'' Button multiple times to Menu Option 42.
3
. Use the ''Up & Down'' to choose your scan function.
4
. Press the ''MENU''to save your choice.
+ 42
E
1.Repeatedly push MENU to select the VFO mode.
2.Hold down the side key 2 until the screen shows the ''seek & search''.
3.
After the screen displays the frequency and sub-audio, you can press the [menu key]
again to store.
xample: Seek & Search
To Next Page
