Set mode items
20
00
Menu Description
High Power
Number Menu Sub-menu (Options)
High power transmission on the current frequency or channel.
Medium Power
Low Power Low power transmission on the current frequency or channel
Medium power transmission on the current frequency or channel.
.
POW
Squelch levels range from 0 to 9, with lower levels being more prone to
interference and higher levels having reduced sensitivity. Setting the level at 5
is advised.
0-9SQL01
Use the up/down keys to select from the standard sequence of analog sub-audio
tones; alternatively, you can enter non-standard sub-audio tones using the
Turn off the analog sub-audio (press 0 in the sub-audio frequency selection list
for a quick shutdown).
keyboard.
OFF
67.0~254.1
R-CDC
Deactivate analog sub-tone (press 0 in the sub-tone selection list for rapid
02
deactivation).
Navigate through the standard sequence of analog sub-tones using the up/down
keys; non-standard sub-tones can also be input directly via the keyboard.
OFF
67.0~254.1
T-CDC
Turn off digital sub-tone (press 0 in the sub-tone selection list for a quick
03
shutdown).
Select the standard sequence of digital sub-tones using the up/down keys.
OFF
D023N~D754I
Disable digital sub-tone (press 0 in the sub-tone selection list to quickly turn it
R-DCS04
off).
Use the up/down keys to select from the standard sequence of digital sub-tones.
OFF
D023N~D754I
T-DCS05
In frequency mode, scan for analog sub-tones set by other transmitters on the
current frequency; the scan will automatically stop when one is found. (Not
available in channel mode)
Scan Activated
SCAN
CTCSS
06
In frequency mode, scan for digital sub-tones set by other transmitters on the
current frequency. (Not available in channel mode).
SCAN
Scan Activated
DCS
If using the scan for analog sub-tone or digital sub-tone function, once a sub-
tone is detected, it is automatically saved as the receive and transmit sub-tone
07
for the current frequency.
Scanning for analog or digital sub-tones will automatically save the detected
sub-tone as the receive sub-tone for the current frequency.
When scanning for analog or digital sub-tones, the detected sub-tone is
automatically saved as the transmit sub-tone for the current frequency.
All
Receive
Transmit
CDCSS
SAVE
MODE
08
To Next Page
